MCP2551

SKU: C05A082
In Stock
30.00د.م.
In Stock
Ajouter à la liste de souhaits
Ajouter à la liste de souhaits
Ajouter à la liste de souhaits
Ajouter à la liste de souhaits
Compare
SKU: C05A082 Category:

MCP2551, Transceiver CAN, 1Mbit/s 8 broches

Quick Comparison

SettingsMCP2551 removeELM327 WIFI Wireless OBD2 Adaptateur scanner diagnostic voiture removeTJA1050 Module Transceiver Contrôleur BUS CAN removePCA82C250 contrôleur CAN removeCAN Shield V3.0 pour Arduino removeScanner automobile multimarques launch X431 CR3001 remove
ImageTransceiver CAN, 1Mbit/sELM327 WIFI Wireless OBD2 Adaptateur scanner diagnostic voitureScanner automobile multimarques launch X431 CR3001
SKUC05A082C02A013C16A105C16A032C16A086
Rating
Price30.00د.م.250.00د.م.35.00د.م.50.00د.م.300.00د.م.350.00د.م.
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Out of stock
AvailabilityIn StockIn StockIn StockIn StockIn StockOut of stock
Add to cart

Ajouter au panier

Ajouter au panier

Ajouter au panier

Ajouter au panier

Ajouter au panier

Lire la suite

DescriptionMCP2551, Transceiver CAN, 1Mbit/s 8 brochesDiagnostic de voiture sans filModule de protocole de communication  CAN pour Arduino

Compatibilité puissante : prend en charge les protocoles OBDII/EOBD/JOBD et fonctionne sur la plupart des voitures américaines de 1996 et européennes/asiatiques de 2000, mais aussi avec les voitures à OBDII et CAN.

Plug and Play : ne nécessite aucune batterie ou chargeur, il suffit de connecter le câble de diagnostic dans la prise DLC du véhicule pour lancer le CR3001 et l’utiliser.


 

ContentDescription: Easily and quickly! OBD-II software for ELM327 is a free program. This is an ELM327 Wi-Fi interface diagnostic scanner, supports OBD-II protocols. It is used to read & diagnose trouble codes, clear trouble codes and detect fuel pressure and so on. After check, the ELM327 Wi-Fi interface will quickly send data to your iPhone, iPad, iPod touch or windows computer from your vehicle in short time. Features: 1.100% brand new & high quality 2.Works with all OBD-II compliant vehicles 3.Clear trouble codes and turn off the MIL ("Check Engine" light) 4.Small & multifunctional, not occupy space and great for placing in the car 5.Read diagnostic trouble codes,both generic and manufacturer-specific,and display their meaning (over 3000 generic code definitions in the database) 6.User friendly and convenient, you could know the conditions of your car anytime 7.Software included in CD for smart-phone, PC and iOS (iPhone, iPad, iTouch, Mac) 8.Works on all 1996 to 2010 cars and light trucks built in the United States, some 1994 and 1995  models are also OK How to use: http://www.tuning.online.pt/noticias-tuning/elm327/ Specification:
  • Color: Black
  • SSID: Wi-Fi OBDII
  • Product weight: 70g
  • Antenna: Internal power
  • Range: 50ft (line of sight)
  • Product size: 90*47*27mm
  • Wi-Fi standard: 802.11a/b/g
  • Consumption: 0.75 watts (with power switch)
  • Operating temperature: -15 to 100 Deg Celsius
  • Instructions:
  • 1. Install a compatible automotive diagnostic application in the host device.
  • 2. Plug this OBD2 Wi-Fi scanner into your car, connect it to a Wi-Fi enabled device.
  • 3. Then the ELM327 interface will quickly send data to your iPhone,iPad,iPod Touch
  • or windows computer from your vehicle.
  • 4. Following are some of the parameters which could be read from the vehicle:
  • RPM
  • Fuel Trim
  • Fuel Level
  • Fuel Pressure
  • Vehicle Speed
  • Mass Air Flow
  • Air Intake Temp
  • Timing Advance
  • Throttle Position
  • Fuel Consumption
  • Barometric Pressure
  • Engine Coolant Temp
  • Calculated Engine Load
  • Intake Manifold Pressure
  • EVAP System Vapor Pressure
  • Contrôleur BUS CAN
  • Alimentation: 5V
  • Dimensions: 22x11m
PCA82C250 est l'interface entre le contrôleur de protocole CAN et le bus physique. Cet appareil offre une capacité de transmission différentielle au bus et une capacité de réception différentielle au contrôleur CAN.
  • Entièrement compatible avec la spécification du protocole de CAN2.0, le taux de transmission maximum de 1Mb /s
  • 2 indicateur LED
  • Deux boutons pour l'utilisateur
  • LED d'indicateur: Tension, réception, envoi, interruption
  • Interface standard SUB-D
  • Extension et de l'interface UART et IIC
  • Interface SPI, Haute vitesse jusqu'à 10MHz
Paramètres:
  • Tension de fonctionnement: 4.8V - 5.2V
  • Consommation: 30 mA
  • Taille: 65 x 53mm
  • Poids net: 55 G

Caractéristiques techniques :

  • Écran : TFT de 1," et 0 x 1 ppp.
  • Plage de tension : 9 à 1 V.
  • Température de fonctionnement : 0 à 50 °C.
  • Température ambiante : -0 à 70 °C.
  • Dimensions : 11 x 6 x ,3 mm.
  • Poids : moins de 00 g.

Toutes les fonctions OBDII.

  • Lis les codes défauts standards (DTC).
  • Efface les DTC.
  • Désactive les témoins de dysfonctionnement (MIL).
  • Couvre les modes 1 à .
  • Test de diagnostic embarqué (mode 6).
  • Affiche le statut du moniteur et de la préparation à l'inspection et à la maintenance (I/M)
  • Lecture des données en direct.
  • Visualisation des données de trame fixes.
  • Lecture des DTC actuels.
  • Affichage des définitions des DTC.
  • Extraction des codes permanents de 0 et plus récents.
  • Lecture des informations véhicule.
Weight0000
DimensionsNDNDNDNDNDND
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare